Monday, 1 October 2012

Samsung I9300 Galaxy S III Software Update

Now i will teach you how to update or fix your Samsung i9300 only for software problem. I recommend you to bring your device to service center when unit dead or any hardware faults. And because it's more save your time when you fix it your own hand.

Like the other Samsung types, it's very simple to update the Samsung device, just read and follow intructions below.

How to Update Samsung Galaxy S III :

<1> -   After you run I9300 Odin Flasher check these options: Auto Reboot, Re-Partition, F.Reset Time.

<2> -   As you Check Re-Partition option that mean you need to select I9300 PIT file into PIT Field.

<3> -   Now select the Firmware Files from its extracted folder in this order:
  • PDA: CODE_I9300xxxxxx_554452_REV00_user_low_ship.tar.md5
  • PHONE: MODEM_I9300xxxxx_REV02_REV04_CL1145430.tar.md5
  • CSC: CSC_Oxx_I9300Oxxxxxx_CL547448_REV00_user_low_noship.tar.md5
<4> -   At this step you can put the phone into Download Mode:
  • Press Volume Down button + Power button and after the message appears you have to press Volume Up button to enter the Download Mode of GS3.
<5> -   Look at the Odin program's window and if all is OK then you can see the Com number that the phone takes in light blue, If not then make sure that you installed the Samsung USB drivers correctly and try again.

<6> -   After the Odin detects your phone you can Click on START button to begin the Update process.

<7> -   The Odin flasher will start to check the Files and then will update your phone with the Firmware files that you have selected.

<8> -   During this try to not interrupt the operation and wait till the phone rebooted by Odin.

<9> -   In case all is OK then you will see  PASS!  word in Green at Odin program's window.

<10> -   Disconnect the GS3 and complete the setup wizard and it is recommended to do Full Reset for the phone with this Code: *2767*3855#.

Jelly Bean For Samsung I9300 Galaxy S3

The first country that received the official Jelly Bean Android 4.1.2 was Poland, But more countries and carriers will start getting it soon. In case you can not wait until it arrives to your country, Then you can update it manually today, Download the firmware package I9300XXELKC then use this Guide to do perform the update.

What features you get inside the new Jelly Bean update are listed here:

- Multi-View (Multi-Windows Multitasking, same as in Note II).
- Page Buddy.
- New Gallery App (Same as in Note II).
- Notification Panel (Notification Panel can now be customized).
- Brightness Slider in Notification Panel Can Now Be Disabled.
- Smart Rotation (Screen Display adjusts to your angle of sightings).
- Continues Input in Samsung Keyboard (Like Swipe or Android 4.2 Keyboard).
- Paper Artist App.
- Group Cast App.

Samsung I9300 Galaxy S III, Android 4.1.2
- I9300XXELL5 / I9300VFGELL1   Italy (Vodafone)
- I9300XXELL5 / I9300VFGELL1   Ireland (Vodafone)
- I9300XXELL5 / I9300VFGELL1   Slovenia (Si.mobil)
- I9300XXELL4 / I9300OXEELL1   Russia
- I9300XXELL4 / I9300VIAELK2   Germany (O2)
- I9300XXELL4 / I9300DBTELL1   Germany
- I9300XXELL4 / I9300OXEELL1   Russia
- I9300XXELL4 / I9300QXEELL1   Russia
- I9300XXELL4 / I9300NEEELL1   Nordic countries
- I9300XXELL4 / I9300AUTELK2   Switzerland
- I9300XXELL5 / I9300VFGELL1   Germany (Vodafone)
- I9300XXELL5 / I9300VFGELL1   Germany (Vodafone)
- I9300XXELL5 / I9300SWCELL1   Switzerland (Swisscom)
- I9300XXELL5 / I9300VFGELL1   Romania (Vodafone)
- I9300XXELL4 / I9300OXAELL4   United Kingdom
- I9300XXELL4 / I9300OXAELL4   United Kingdom
- I9300XXELL5 / I9300VFGELL1   United Kingdom (Vodafone)
- I9300XXELKC/I9300OXXELK4   XEO Poland


Samsung I9300 Galaxy S III  Flasher

Samsung I9300 Galaxy S III USB Drivers

0 comments:

Post a Comment